Hongrijia Depurate Facility Science & Technology Co., Ltd.
Hongrijia Depurate Facility Science & Technology Co., Ltd.
Add to Cart
Compressed air contains difffferent types of pollutants. These pollutants must be treated and reduced to acceptable levels to ensure the safe, effiffifficient and economic operation of the compressed air system.
Most industrial compressed air applications operate at 7, 10, or 13 bar pressure, and purifification equipment is usually designed around these working pressures.
However, some application industries require higher working pressure, which will also increase the concentration of pollutants. Stainless steel compressed air fifilter, designed to remove liquid aerosols, water, oil and sub-micron particles in the compressed air system, the fifiltration effiffifficiency can be up to 99.99%, remove 0.01 micron particles and small droplets, improve the product pas rate, reduce maintenance time and cost, improve production effiffifficiency Pass rate, reduce maintenance time and cost, improve production effiffifficiency and ultimately reduce production costs.
Advantages of Stainless Steel Air Filter
①Stainless steel material, 304, 316, 316L optional, resistant to acid and alkali chemical corrosion environment, the shell warranty period is 15 years; the Filter Element is 4000-6000 hours;
②Deep-wrap filtration, with a filtration performance of 99.99%, suitable for marine operating platforms;
③The double-layer Stainless Steel Filter element support net makes the filter element stronger and prevents secondary pollution;
④Precise thread processing technology, good sealing performance and easy installation, low pressure drop;
⑤Working pressure can be customized
Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g). For the application in other working pressure, please refer to the correction factors.
| Model | Connection | Flow rate | Dimension(mm) | |||||
| L/S | m³/min | scfm | Width(W) | Height(H) | A | B | ||
| G-BHL017 | Rc1/2" | 16.7 | 1.0 | 35.3 | 85 | 195 | 19.6 | 175.4 |
| G-BHL025 | Rc3/4" | 25.0 | 1.5 | 53.0 | 85 | 195 | 19.6 | 175.4 |
| G-BHL030 | Rc1/2" | 30.0 | 1.8 | 63.6 | 88 | 205 | 18.8 | 186.2 |
| G-BHL035 | Rc3/4" | 33.3 | 2.0 | 70.6 | 88 | 205 | 18.8 | 186.2 |
| G-BHL058 | Rc3/4" | 46.7 | 2.8 | 98.9 | 110 | 250 | 24.2 | 225.8 |
| G-BHL068 | Rc1" | 60.0 | 3.6 | 127.1 | 110 | 250 | 24.2 | 225.8 |
| G-BHL080 | Rc1" | 80.0 | 4.8 | 169.5 | 118 | 380 | 32.2 | 347.8 |
| G-BHL145 | Rc1-1/2" | 120.0 | 7.2 | 254.2 | 118 | 380 | 32.2 | 347.8 |
| G-BHL220 | Rc2" | 200.0 | 12.0 | 423.7 | 143 | 470 | 43.0 | 427.0 |
| G-BHL260 | Rc2-1/2" | 233.3 | 14.0 | 494.4 | 143 | 470 | 43.0 | 427.0 |
| G-BHL330 | Rc2" | 267.2 | 16.0 | 564.8 | 150 | 814 | 55.5 | 758.5 |
| G-BHL360 | Rc2-1/2" | 317.3 | 19.0 | 670.7 | 150 | 814 | 55.5 | 758.5 |
| G-BHL405 | Rc2-1/2" | 367.4 | 22.0 | 776.6 | 185 | 584 | 58.5 | 525.5 |
| G-BHL430 | Rc3" | 467.6 | 28.0 | 988.4 | 185 | 584 | 58.5 | 525.5 |
| G-BHL620 | Rc3" | 620.0 | 37.2 | 1313.6 | 185 | 814 | 58.5 | 755.5 |
| Technical Requirement | Maxi.pressure:250barg, Maxi.working temperature:90℃, Mini working :1.5℃ | |||||||
| Model Number | BHL017 | BHL025 | BHL030 | BHL035 | BHL058 | BHL068BH | BHL080 | BHL145 | BHL220 | BHL260 | BHL330 | BHL360 | BHL405 | BHL460 | BHL620 |
| Flow Rate (m³/min) | 1 | 1.5 | 1.8 | 2.0 | 2.8 | 3.6 | 4.8 | 7.2 | 12.0 | 14.0 | 16.0 | 19.0 | 22.0 | 28.0 | 37.2 |
| Filter Grade | PF/AA/AO/AX/ACS/AR/AAR | ||||||||||||||
Element Performance
 | | | | | | |
| PF | AO | AA | AX | ACS | AR | AAR |
| As a primary filter, particles whose diameter more than 5μm can be removed, the maximum residual oil contect is negligible. | High efficiency general protection, dust particles, water mist and oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³(21ºC), 1ppm(w). | High efficiency oil removal filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC), 0.01ppm(w). | Ultra-efficient filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC), 0.001ppm(w). | Dust particles whose diameter more than 0.01μm, oil vapor and odor can be removed, the maximum residual residual content of oil vapor does not exceed 0.003mg/m³(21ºC), 0.003ppm(w). | Dust particles whose diameter more than 1μm can be removed. | Dust particles whose diameter more than 0.01μm can be removed. |
International test and measurement standard ISO12500
>ISO 12500 has made clear a general test and definition method for the Compressed Air Filter manufacturers. The main performance parameters
are the air inlet oil content and particles size distribution of the solid particles.
>ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
>ISO12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.
>ISO12500-3 specifies the requirements for removal of particulate matter from solid pullutants.
Products are tested with the international advanced testing equipment based on standard ISO12500,
which is equivalent to the standard ISO8573.
| Filtration Grade | PF | AO | AA | AX | ACS | AR | AAR | |
| Size of solid particles(ISO12500-3) | 5μm | 1μm | 0.0μm | 0.01μm | - | 1μm | 0.01μm | |
| - | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% | |
| Filtration performance of oil(ISO12500-3) | 50% | 80+% | 99.9+% | 99.99% | - | - | - | |
| Residual oil content(ISO12500-1) | 5mg/m³ | 0.6mg/m³ |
| <0.001mg/m | <0.004mg/m³ | - | - |
Why choose YUKA as your long term business partner?
YUKA's YD series filters are ideal solutions for removing pollutants in compressed air systems and saving energy. Use imported quality filter materials and design technology to ensure high-quality compressed air quality and lower operating costs.
We have a full set of testing equipment imported from Europe. Filters and gas-water separators can be tested and rated according to ISO 8573.1: 2009
air quality standards, and provide performance test reports.
Packing & Shipping
Packing: Good packing will protect the goods from damage during transport. We use strong, durable packing material to pack the goods.
Shipping: By air,by sea ,by express